Lockly Secure Plus


Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with […]

Safety Precautions

Please read all instructions carefully. Remind all Lockly™ users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your […]


Making sure your Lockly™ is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below. DO Rinse the touchscreen with warm water prior to cleaning. Use the application of soap with a damp, lukewarm cloth. Airdry or wipe dry with a soft microfiber cloth to avoid scratches. DON’T Don’t use […]

Lockly™ Features

Auto Lock Feature Lockly™ Secure can be programmed to auto-lock between 5 seconds and 5 minutes after the lock opening or have it disabled. You can always manually lock by pressing the button anytime located on the bottom of the keypad. 9V Backup Access When your Lockly™ is out of power, you can temporarily activate […]

OAC – Offline Access Code

Updated Firmware PGD728: 1.09.01 and after / PGD728F: 1.00.80 and after / PGD628: 1.00.60 and after / PGD628F: 1.01.30 and after   The Offline Access Code (OAC) is a unique feature of Lockly™. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make […]

How to Disable Safe Mode

There are three (3) ways to disable Safe Mode. Option 1 – Entering Correct Access Code Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 – Lockly™ Bluetooth App Use the app that is synced to your Lockly™ to disable Safe […]

Safe Mode – Overview

Lockly™ will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon  will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint (Secure Plus / Pro ) or enter the correct Access Code twice in […]

Locking Lockly™ Deadbolt with Physical Key

To unlock your Lockly™ using the physical key (supplied), open the key cover on the handle by turning the cover counter clockwise to reveal the keyhole. Insert your key and turn clockwise or counter clockwise to lock or unlock the door.

Locking Lockly™ with App

You must have the Lockly™ iOS or Android app installed in order to lock and unlock with the smartphone app. To lock your Lockly™ with the app, open up the app, select your Lock. This will take you to the Control page. Click the Lock/Unlock circle to open and close your lock.

Locking Lockly™ with Fingerprints

Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Adding a Fingerprint. If your fingerprint is registered and acknowledged, you will hear a “beep” sound and a Green LED will light up on the fingerprint scanner. You can […]

If you're looking to shop the Lockly store, visit Lockly.com or click the Shop Now button.
Shop Now
Not found