Programming

How to Delete Stored Fingerprints

While in Programming Mode, select “2DE” to delete a Fingerprint. If you are not in Programming Mode, click here to see how to enter Programming Mode. After pressing “2DE” to delete, press “FP” to delete a fingerprint. Your registered fingerprint numbers will be displayed on the screen. Tap number to rotate to the next registered fingerprint. […]

How to Add a Fingerprint

In this section, you will learn how to register a fingerprint to your new smart lock. Fingerprint registration is only available in the Lockly™ Secure Plus / Pro, and not available in Secure models. We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly™ will only accept fingerprint […]

How to Delete an Access Code

While in Programming Mode, select “2DE” to delete an Access Code. If you are not in Programming Mode, click here to see how to enter Programming Mode. After pressing “2DE” press “Pd” to delete an Access Code. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. […]

How to Adding an Access Code

While in Programming Mode, select “1AD” to add an Access Code. If you are not in Programming Mode, click here to see how to enter Programming Mode.             After pressing “1AD” press “Pd” to add an Access Code.             Enter your new 6 – 8 digit […]

Programming Mode

Enter Programming Mode Remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons. Press the Program button to enter programming mode. Note: Program button will be disabled once synced to a smart phone. Configure all settings via synced smart phone. End Programming Mode Press the Program […]

If you're looking to shop the Lockly store, visit Lockly.com or click the Shop Now button.
Shop Now