Lockly™ can be unlocked using 1 of 4 ways – via your stored Access Code, registered fingerprint (Secure Plus / Pro only), smartphone with Bluetooth, or with the physical key supplied with your lock.
Slide your hand across the screen to activate the keypad.
Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit.
If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, Lockly™ will beep twice.
Note: Three consecutive wrong attempts will put Lockly™ in Safe Mode. Read more about Safe Mode here.
Lock your Lockly™ by pressing the OK Button anytime when the door is closed. Lockly™ will also auto-lock after five (5) seconds after unlocking and opening.
You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN Genie™ version (recommended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads.